High pressure misting system

This is the core system we install. The dry fog produced by high pressure nozzles evaporates before it reaches a surface; it does not wet tables, produce or floors.

Surfaces: Stay dry
Installation: Retrofit to existing structures
Area: Nationwide, based in Ankara

High pressure misting system under a garden canopy — A high pressure misting line installed around a canopy, producing fog that does not wet.

What high pressure misting is

High pressure misting is the release of water into the air after it has been broken into very fine droplets under pressure. As those droplets evaporate they draw heat from the air: the space cools and humidity rises.

The system is fixed pipework. It consists of a high pressure pump, filtration, high pressure tubing and high pressure nozzles positioned to suit the space, all managed through a control panel. You will also see the same system sold as fogging or atomising systems.

Where we install it

We install this system anywhere atomised water does useful work, whether the purpose is outdoor cooling, humidification or dust suppression:

Why high pressure

Whether misting works at all depends on the droplet being small enough. A coarse droplet loses to gravity and lands on the surface: it wets the space, never completes its evaporation, and does not deliver the cooling you were expecting.

High pressure solves that at source, which is why we do not build low pressure installations. The same system goes on a terrace full of people and over a retail display; only the design changes with the space.

What determines the price

The largest item in the budget is the size of the area: as the area grows so does the nozzle count, and as the nozzle count grows so does the high pressure pump required. Beyond that, the filtration, control panel, line material and fittings all move the total, and nozzle prices vary with the type chosen.

That is why we prefer to look at the area and give a firm quotation rather than an estimate over the phone. It is also what stops unexpected cost differences appearing later in the process.

Quotation and installation

We are based in Ankara and install across Türkiye. Site surveys in and around Ankara are free of charge; you can read more on the misting systems in Ankara page.

Send us the width and length of your area through the contact form, or call 0507 492 02 04. After installation we also provide maintenance and service.

Frequently asked questions

Does a high pressure misting system wet things?

Installed correctly, it does not. High pressure nozzles produce a very fine dry fog that evaporates before it reaches a surface, so tables and floors stay dry. Almost every complaint about wetting traces back to an installation that was not suited to the space, or to nozzles that have worn over time.

Does it keep insects away and hold dust down?

It does both. A working mist curtain in an open area noticeably reduces flying insects entering the space, and airborne dust picks up water, gets heavier and settles. On sites where dust control is the priority we install that as a service in its own right, under the name dust suppression.

Can it be retrofitted to an existing pergola or awning?

Yes. The majority of our installations are retrofits. The line is run inside or along the edge of the profile and the nozzles are fixed with carrier clips. We can usually complete the work without closing the business for long.

Does the system need to be removed for winter?

No. The line only needs to be prepared for winter, and that is part of our maintenance and service work: we winterise the line at the end of the season and recommission it at the start of the next one. In climates where the line can freeze, this step is not optional.

Let's find the right system for your site

Just send us the width, length and height of the area in metres (e.g. 10 m × 20 m, 3 m high). Site survey and system design are free of charge.

Request a site survey 0507 492 02 04