Skip to content
Vehicle disinfection tunnel at a farm entrance

Disinfection tunnels

We build vehicle disinfection tunnels

The vehicle enters, the exit door closes and atomised disinfectant fills the tunnel as a fog. The driver passes through a personnel unit on the same route.

Misting Systems and Open-Area Cooling

Misting is the breaking of water into very fine droplets under high pressure. As those droplets evaporate they draw heat from the air and the space cools. With the misting systems we install, we cool and humidify everything from a café terrace to a greenhouse, from livestock housing to a production plant.

The same technology is sold under several names: fogging systems, misting fans, atomising systems or simply outdoor coolers. They all rest on the same two things: a correctly chosen nozzle and a high pressure pump sized to feed it.

  • Nationwide installation

    We are based in Ankara and install across Türkiye. Site surveys in and around Ankara are free of charge.

  • Installed right, it does not wet

    The dry fog produced by high pressure nozzles evaporates before it reaches a surface; tables and floors stay dry.

  • Service after installation

    Seasonal maintenance, clearing clogged nozzles and breakdown service are all handled by us.

Misting systems and misting fans

What we install is a fixed-pipework high pressure misting system. If you have been looking at misting fans or fogging fans, that same need is met here with the same technology.

High pressure misting system

What we install. A high pressure pump and high pressure nozzles produce a dry fog that evaporates before it lands; it does not wet tables, produce or floors.

Cafés, hotels, greenhouses, mushroom farms, livestock housing, industry

Details

Misting fans

Misting fans, fogging fans and humidifying fans are different names for the same need. We meet that need with the misting systems we install.

For anyone looking at outdoor cooling

Details

What we do

From cafe terrace cooling to mushroom farm humidification, from produce display misting to dust suppression, we work wherever atomised water does useful work.

All services

Based in Ankara, installing across Türkiye

Our workshop and offices are in Ostim, Ankara. For sites in and around Ankara we can usually carry out the survey within the same week, draw up the design and start installation; that survey is free of charge. We install and service in every province of Türkiye.

Pricing is set by the width and length of the area and the equipment it calls for, and nozzle prices vary with the type, material and filtration chosen. That is why we prefer not to quote a figure over the phone: once we have the dimensions, we prepare a quotation for your site.

From the guides

Frequently asked questions about misting

Does misting actually cool the air?
Yes, through evaporation. A misting system breaks water into very fine droplets; as those droplets evaporate they take heat out of the air and the space cools. How much depends on the humidity already in the air, so the same system does not give the same result everywhere. In dry inland air the difference is pronounced. We look at your site and tell you plainly what to expect in that climate rather than quoting a number that only holds somewhere else.
Will tables, seating and guests get wet?
A properly installed high pressure system does not wet them. The dry fog evaporates before it reaches a surface, so tables, chairs and floors stay dry. Almost every complaint about wetting traces back to one of two causes: a system that was not suited to the space in the first place, or nozzles that have worn over time and are no longer atomising properly.
Does misting keep insects away and hold dust down?
It does both. A working mist curtain in an open area noticeably reduces flying insects entering the space. By the same mechanism, airborne dust particles pick up water, get heavier and settle. In industrial settings we install that effect as a service in its own right, under the name dust suppression.
What determines the price?
The main driver is the size of the area and therefore the number of nozzles; as the nozzle count rises, so does the size of the high pressure pump required. Beyond that, the nozzle, filtration and control panel types all move the total. Send us the width and length of the area and we will prepare a quotation for your site.
Where do you install?
We are based in Ankara and install across Türkiye. Site surveys in and around Ankara are free of charge; elsewhere, surveys and installation are planned by appointment. For enquiries from outside Türkiye, tell us where the site is and what it involves and we will say plainly what we can cover.

Let's find the right system for your site

Just send us the width, length and height of the area in metres (e.g. 10 m × 20 m, 3 m high). Site survey and system design are free of charge.