Skip to content
İnkotesTürkçe

Misting systems

What we install is a fixed-pipework high pressure misting system, engineered for the specific site. We are based in Ankara and work across Türkiye.

System
High pressure misting
Installation
Engineered per site
Site survey
Free of charge

Misting is the breaking of water into very fine droplets under pressure. As those droplets evaporate they draw heat out of the air, and the space cools. Whether it is sold as misting, fogging or atomising, every system of this kind rests on the same principle: evaporative cooling.

Everything we install is high pressure misting, and the reason is simple. If the droplet is not small enough it falls and wets what is below it. High pressure solves that at source, which is why we treat it as the only correct approach both where people are present and where a product or process would be damaged by water.

One thing worth saying plainly: evaporative cooling works with the air it is given. In dry inland air the effect is pronounced; in humid coastal air the same system does less, because the air is already close to holding all the water it can. Anyone who quotes you a fixed temperature drop without asking where the site is has skipped the most important variable.

High pressure misting system

What we install. A high pressure pump and high pressure nozzles produce a dry fog that evaporates before it lands; it does not wet tables, produce or floors.

Cafés, hotels, greenhouses, mushroom farms, livestock housing, industry

Read more

Misting fans

Misting fans, fogging fans and humidifying fans are different names for the same need. We meet that need with the misting systems we install.

For anyone looking at outdoor cooling

Read more

Nozzles, pumps and spare parts

The result of the system comes out of the nozzle. A correctly chosen nozzle, and a high pressure pump sized to feed it, are the two things that decide whether an installation succeeds.

We supply nozzles, filters, clamps, clips and the rest of the fittings. Prices vary with the type and material chosen. Tell us what you need and we will identify the right part and quote it. You can also read the nozzle page first.

0507 492 02 04

Frequently asked questions

High pressure or low pressure misting?
Low pressure systems run off mains water and produce a visibly coarser droplet. That droplet does not fully evaporate in the air, so it lands: furniture, floors and people get damp. High pressure systems use a dedicated pump to break the water into a far finer fog that evaporates before it reaches a surface. For anywhere people sit, or where a product must not get wet, high pressure is the only approach we recommend, and it is the only kind we install.
Can misting be added to an existing pergola?
Yes. Most of our installations are retrofits onto existing structures. The line is run inside or along the edge of the profile and the nozzles are fixed with carrier clips. We can usually complete the work without closing the venue for long.
What determines the price of a misting system?
The width and length of the area set the number of nozzles, and the nozzle count sets the pump you need; that pump is the largest single item. Beyond that, the nozzle type, filtration, control panel and line material all move the figure. Send us the dimensions and we will prepare a quotation for your site.
Do you provide service after installation?
Yes. Seasonal maintenance, clearing clogged nozzles, filter replacement, breakdown service and spare parts. We also service systems that we did not install.
Do you supply outside Türkiye?
Our installation crews work across Türkiye. For projects beyond that, get in touch and tell us where the site is and what it involves; we will tell you plainly what we can and cannot cover.

Let's find the right system for your site

Just send us the width, length and height of the area in metres (e.g. 10 m × 20 m, 3 m high). Site survey and system design are free of charge.

Request a site survey0507 492 02 04